Administering safety and keeping away from mishaps while working at heights could be challenging. Many industries oblige workers to labour at heights for extend periods of time. A specialised training program that ensures the essentials of labouring at heights and staying away from potential dangers is an absolute necessity for such workers.
Control Measures to Ensure Height Safety at Workplace
Falling from height still remains among the top reasons for major injuries and deaths at workplace. For that special training is provided specially in construction and oil and gas industries when they are working at heights. These training’s consist of control measures to be followed by workers while working at different heights. Following are the levels of control measures which are usually trained by companies to ensure height safety.
Level 1: Avoid
This level of control measure is avoidance. Workers should avoid as much as possible to work on heights unless it is absolutely necessary.
Level 2: Avoid Falls by Working on the Existing Work Area
If there is an available work area, with appropriate fall prevention, workers should work there in preference to wear equipment. An existing work area is some place that you don’t have to utilise or add any extra work equipment to avoid the danger of a fall from occurring. Examples are flat roof with edge protection, balconies, oil platforms, parapet walls and so forth.
Level 3: Use Collective Equipment to Avoid Falls
Before using any other equipment, the workers should use collective equipments to avoid falls. The use of collective equipments is required by The Regulations. Examples are External Advance Guardrails, etc
Level 4: Use Personal Protection Equipment to Avoid Falls
Personal Protection Equipments are different techniques which restrict the workers to move to avoid dangers and falls hazards. Examples are belts with limited length or positioning work equipment.
Level 5: Mitigate Distance
Workers should lessen the distance by the usage of Collective Equipment. For e.g. airbags and nets should be place around and under the workplace in order to lessen the distance and minimise the consequences of falling.
Level 6: Instruction and Training
Procedures and instructions should be provided in working at heights trainings. For example Procedure of Tower Assembly, etc.
Australasian Training and Education Centre offer a unique safety training which comprises of control measures which are important while labouring at heights. It trains workers how to inspect and select safety gear systems. Workers that require the use of a safety harness have to be specially trained on how to wear it and know rescue techniques and avoid falls. For more information please visit